Image 1 of 1
Image 1 of 1
Image 1 of 1
Image 1 of 1
APPLICATOR ONLY PRODUCT
375ml
The Hempel Silic One propeller kit prevents fouling on your boat's propeller. The set consists of an anchoring layer (Tiecoat) and a fouling release (Silic One). Both products are easy to apply and are free of biocide.
If the propeller is already painted with Antifouling, remove old antifouling.
Clean with Hempel’s Pre-Clean (for aluminium propellers make sure that Hempel’s Pre-Clean has been thinned 1:20).
Create a palpable roughness by abrading with 40 sand paper or other mechanical methods, preferably abrasive blasting. Wash with freshwater and allow to dry, before applying relevant specification as below. Apply as fast as possible the primer to avoid oxidation.
Silic One: Download Product Data Sheet | Download Safety Data Sheet
Silic One Tiecoat: Download Product Data Sheet | Download Safety Data Sheet
APPLICATOR ONLY PRODUCT
375ml
The Hempel Silic One propeller kit prevents fouling on your boat's propeller. The set consists of an anchoring layer (Tiecoat) and a fouling release (Silic One). Both products are easy to apply and are free of biocide.
If the propeller is already painted with Antifouling, remove old antifouling.
Clean with Hempel’s Pre-Clean (for aluminium propellers make sure that Hempel’s Pre-Clean has been thinned 1:20).
Create a palpable roughness by abrading with 40 sand paper or other mechanical methods, preferably abrasive blasting. Wash with freshwater and allow to dry, before applying relevant specification as below. Apply as fast as possible the primer to avoid oxidation.
Silic One: Download Product Data Sheet | Download Safety Data Sheet
Silic One Tiecoat: Download Product Data Sheet | Download Safety Data Sheet